Sanyo BC-1206 Beer Cooler
Cooler with 6-1/2-cubic-foot capacity; holds up to 1/2 keg
CO2 tap system with Sankey keg tapper, pressure gauge, regulator, and draft arm
Black exterior with 4 casters for portability
Includes cleaning kit and beer FAQ guide
Measures 23-5/8 by 37 by 25 inches
Ideal for home brewers or just regular ol' beer drinkers, this cooler keeps cold brews on tap and ready to pour. With a capacity of 6.5 cubic feet, the cooler holds up to a half-barrel keg and comes with a complete CO2 tap system to get things flowing. The tap system includes a Sankey keg tapper, a type that fits all North American beer kegs; a pressure gauge; a pressure regulator; and an arm, for pulling drafts, that rises out of the cooler's top. A cleaning kit and beer FAQ guide are thrown in for good measure. The cooler's sleek black exterior and compact size (37 inches tall, 23-5/8 inches wide, and 25 inches deep) make it inconspicuous in the corner of a rec room, workroom, or kitchen. However, four casters on this kegerator's bottom let hosts move the unit to where the party is. --Cristina Vaamonde
4 casters for portability
Complete CO2 tap system with cleaning kit and beer FAQ guide
Holds up to half-barrel keg (approx. 6.5 cubic feet)

Convair Cool Wind 600
Uses 2-speed fan and water to cool air
Covers up to 120 square feet
Runs on the same energy as a 60-watt light bulb
Made of rust-proof polymers
28-1/2 by 17 by 9 inches; 2130 Btu per hour
Product Dimensions: 20.8 x 18.1 x 11.2 inches ; 18.0 pounds
Shipping Weight: 17.00 pounds
Using the cooling power of evaporation, the Convair Cool Wind 600 cools and filters fresh outdoor air, then distributes it over 120 square feet for your comfort. Set in front of a partly open door or window, the cooler first pumps water from a 1.6-gallon reservoir through its cooling pad. A 2-speed fan then draws fresh air through the pad, lowering its temperature and circulating it. While air draws through, a filter traps pollen and dust before they enter your space. Simple to operate, the unit is both quiet and energy-efficient, using the same energy as a 60-watt light bulb. It's ideal for hot and dry climates, transports easily, and is made from rust-resistant polymers. It can also be used without water as a basic fan. Structural details include simple dials for temperature and speed control and a front-mounted gauge that indicates when the reservoir is low. The cooler measures 28-1/2 by 17 by 9 inches and requires basic assembly.